Visit Zacobria Webshop

Set up the Universal-Robots:

The UR arrives in two similar cardboard boxes – one with the controller and one with the robot itself. Unpack both boxes and place the controller on a table or the floor.

The robot is folded in foetus position and can be placed on a table, stand or any place that is prepared with 4 holes that fit the foot base. Since the robot is folded in this transportation position is not possible right now to fit all 4 bolts, but 1 or two is enough to hold the robot – so just fit the bolts where the base holes are accessible.


The monitor is a touch screen monitor and can be operated as it is with pressing the screen and onscreen keyboard. It is possible to connect a mouse and keyboard to the USB connector on the side of the monitor and especially a mouse is useful.


Disclaimer: While the Zacobria Pte. Ltd. believes that information and guidance provided is correct, parties must rely upon their skill and judgement when making use of them. Zacobria Pte. Ltd. assumes no liability for loss or damage caused by error or omission, whether such an error or omission is the result of negligence or any other cause. Where reference is made to legislation it is not to be considered as legal advice. Any and all such liability is disclaimed.

If you need specific advice (for example, medical, legal, financial or risk management), please seek a professional who is licensed or knowledgeable in that area.

By Zacobria Lars Skovsgaard
Accredited 2015-2018 Universal Robots support Centre and Forum.


Follow @zacobria